the main / All the repair / Furniture / How is the repair of kitchen countertops made of artificial stone

How is the repair of kitchen countertops made of artificial stone

It often happens that as a result of an oversight or an object falling onto the worktop formed scratches and chips. When you find yourself in this situation,, We advise you not to get upset, because the problem is completely solved. Often scratches on countertop surface caused by the problem of its use for cleaning abrasives, as well as due to the cutting of products directly on the surface. Typically restoration of acrylic stone countertops when a shallow scratches, they are sufficient to clean abrasive, and then zapolirovat felt pictures using special tools and pastes. Consider the important points when providence works because the artificial stone may have a different composition of various defects, and repair techniques with the different.

Repair lung damage

Usually, this kind of work as the restoration of artificial countertops, it involves an initial inspection to restore countertops master with subsequent procedures.

Repair of artificial stone countertops made both on-site, when, if slight damage, and from the removal to a production company, if required significant intervention.

When on the surface of any slight scratches or stains, who fails to remove, it will sander with fine abrasive wheel. such a problem, as spots of different detergents, and hot surface burns, and small scratches, can be removed and their hands.

ojog_na_stole
Spot burn hot pan remote grinding method

This will require a polyester composition, specifically for this. Scratches can be polished, first medium, and then, very fine emery cloth. After the polish should be. very carefully, slowly and carefully soft felt cloth, to restore the original look.

Master restorers in this case, have recourse to grinder with felt attachment. But in the repair of their own hands is better to use a felt cloth. Must be careful, if the worktop is made of acrylic with a small coating artificial stone. In this case, the polishing surface is not performed.

To restore the original strength and beauty, operation must be performed by qualified personnel. Otherwise, independent intervention in the repair of the surface of the quartz agglomerate, It may lead to further rise in the cost of restoration work or to buy a new countertop. recovery and repair artificial countertops - the process is fairly labor-intensive.

We use adhesive for repairs countertops made of artificial

For repairs of products made of artificial stone are commercially available special repair kits, which include special formulations for putties and sealing chipping countertops.

The order of work is in the slot grinder with diamond blade grooves. Cleaning and degreasing of the surface near portion, to be renovated.

The upper layer of the powder acrylic artificial stone is useful for, to add it to a two-component polyester adhesive mixture. The treated area is degreased, deepening and expanding. Next to the terminal in the repair of artificial stone countertops, which is matched in color, exactly fill the resulting groove and remove excess. After the time required to sustain, required for hardening the mixture overnight.

repair acrylic countertops
joint resurfacing

After the entire surface of the ground and polished. After we get a perfectly smooth surface.

Usually there is usually no need to dismantle the product restoration of countertops made of artificial stone is done at home. It also happens, that there is a need to replace the constituent elements in low-quality products.

Repair large cracks

Restoration of kitchen worktops, having such defects, as chips, require "patches", made of the same material, that itself worktop. After cutting out the problem areas, resulting in niche embedded stone fragment, treated with glue. Then this part is polished and does not stand out from the crowd.

Deep cracks and splits on the decorative stone pieces are sealed suitable material and bonding it further buffing polishing.

Choose material sufficiently solve, since the color gamut has an enormous difference, but some can be, and after polishing even differs slightly pasted a piece will not be very noticeable, as the stone though, and has no artificial uniform color.

In specialty stores selling repair kits with different color chips and two-component filler and colorless glue. This restoration of decorative countertops is quite complex and requires certain skills.

Features repairs tops of agglomerate

It is more difficult to agglomerate worktop. Quite expensive agglomerate worktop is very sturdy and almost not subject to scratches and chips, as on 90% It is made of marble or quartz, and this is its main advantage. But if you somehow unthinkable way managed to fight off her corner or made as, it is easier and cheaper to replace it with a new acrylic, than repair.

In most cases, defects in products made of quartz agglomerate are chipped, which can occur when hitting heavy or sharp objects on the surface, or end products. Further in this article we will look at is the elimination of such defects.

For the restoration using special restoration materials.

With little cleavage (less 1 mm) expand its, that the adhesive composition was able to connect with a stone structure, after drying.restoration countertops

The adhesive composition is made based on polyester resin, with the addition of silica dust and a coloring pigment. After drying, the adhesive residue off blade, and then wipe the surface treated portion of the alcohol.

Grinding and polishing the surface of the quartz agglomerate is fraught with loss of uniformity glossy coating.

Repair microcracks countertops

Minor defects such as microcracks and abrasions easy to fix help polishing the surface of the artificial stone countertops, which are best left to a specialist. Starting with coarse sandpaper, using a grinder removed the bulk of the defect. Later work is brought to an end by means of polishing paste and a special nozzle.

Also on the surface of the countertop at the wrong inset equipment may arise microcracks, which is not immediately visible, but over time they grow and merge into a very visible, that the very spoils the appearance of a stone surface.

GENERAL
Special two-component adhesive composition GENERAL

Such microcracks corrected using the acrylic-based adhesive, which fills the crack after pre-treatment. The final stage is also produced resurfacing.

Folk remedies restoration countertops

Although, There are other methods of repairing cracks on the surface of the acrylic, they require special materials, tools and skills, which most people do not own professional.

Consider options for the repair of furniture with his hands, which is easy to take advantage of even a novice!

Restoration using scoring super glue

In the beginning you should visit a specialty store for the purchase of superglue or two-component adhesive. This method works best against micro-cracks and chips. Cracks on countertops made of artificial stone embedded superglue.

Clean the crack using the toothbrush and hydrogen peroxide. If dark spots are not cleared, apply a chlorine-containing detergent. Then rinse solvent such as an alcohol or.

Apply a thin layer of superglue surface cracks.

Do not work on the table for at least 2 hours. During this period, the adhesive penetrates into the crack and harden. Work is performed very carefully and use the tape in the.

restoration method using glue

Repair of cracks in the surfaces of solid materials using a two-component epoxy filler may be faster, easier and more reliable, than via an adhesive, especially when repairing wide cracks countertop.eboksidny glue

Gather all the necessary tools and supplies:

  • denatured alcohol;
  • two-component epoxy adhesive;
  • several colors, corresponding base shade and stains on the table;
  • a few wooden sticks from ice cream;
  • several brushes and brushes;
  • Grinding wheels and a couple of rags and sponges.

If you have a piece of source material worktops, rub it with a file and save it for further mixing with the filler. Proceed in the following order:

  • Clean and degrease the cracks alcohol solvent.
  • On the surface, place a one-time two drops: epoxy and hardener. Take a number, that was enough to fill cracks.
  • With a drop of glue mix the paint and / or chips from the original material countertops, bringing it to the desired color. Then mix with the hardener.
  • Apply epoxy glue on cracks, distributing it with a wooden stick, and leave the filler slightly convex relative countertops.

We recommend the use of tape when working with glue.

adhesive mastic option for restoration

Look at the applied adhesive. If the color is not quite right, or he is too busy to, to mix with the pattern, add a few drops of paint, appropriate spot on the table. be patient, do not overdo it. Take a step to the side, to get a general impression.

Leave the filler to harden according to manufacturer's instructions. When the filler has hardened completely, start sanding the surface with fine sandpaper.

Furniture dyes

It is used to mask the slight scratches. It is a tube, which is closed by a lid with a brush, such as nail polish.handles furniture

It is applied in one or more layers to eliminate the defect. Surplus removed edge of the plastic card, but the surface itself is polished with felt or soft cloth. The perfect color to choose is difficult, therefore it is possible to finish the missing invoice ordinary felt-tip pen and cover the furniture varnish. Ideally, use a spray paint, which is applied evenly and does not leave a visible edge coating composition.

For these purposes, there are both professional, and traditional methods. At last there is an important caveat - before, than to apply them on the visible surface, you need to try out the method on an inconspicuous area, so as not to create more problems.

Application of wax furniture in the restoration

Waxes are soft and hard, and they have very different. In soft wax more colors, Yes, and it is easier to apply. But the firm is more reliable in the further operation. It can be used for large dents or chips. It is used as a quick and easy way of restoration of furniture.

wax for furniture
Wax for furniture used in the restoration of chipboard

Soft furniture wax heats up easily even fingers and quietly applied to the problem area.

Surplus easy to remove with a spatula metalichechkim. Then, the surface can be lacquered with an appropriate degree of gloss.

This method is intended for areas not exposed to constant exposure and is temporary!

Hard wax

It is more stable and expensive professional tool, so work with it requires some skill. Normally professionals use special soldering iron.

Before autonomous repair e.g. hard wax is melted or lighter construction hairdryer. The molten composition is applied to the crack. Then you have to wait about a minute, while the tool freezes, and then cut off the remnants of the blade. polished surface, to hide the traces of restoration.

Video:

A selection of video on the restoration countertops

Video:

Video:

https://www.youtube.com/watch?time_continue=193&v = _dcwDFqNfpI

Share with your friends to vote record

Rate post:
1 Звезда2 Звезды3 Звезды4 Звезды5 Звезд (1 assessments, the average: 5.00 of 5)
Loading...
Do you want to place the information in this or any other article - contact, discuss.

Share your experience in the repair

Your email address will not be published. Required fields are marked *

10 + twelve =