the main / Floor / On the floors of laminate and squeaks

On the floors of laminate and squeaks

Almost every person in his life faced with creaky floors made of laminate, and knows, as annoying. Especially laminate creak terrible, when the house is small children or sick persons.

any, even cautious movement on the floor involuntarily leads to creak, interrupts the peaceful sleep of the child, irritates sick or elderly person.

Meanwhile, there are methods, allowing so to lay laminate, so it does not creak.

Well, if the floor is already laid and began to creak, it will help you eliminate the creaking floors our recommendations.

Why creaking floors in apartment

laying laminateThis article deals with all cases of creaking floors made of laminate, Application Method, prevents squeaking during operation, Tips to eliminate squeaking into the already laid floors.

When creaks laminate, the most demanded task is, how to fix this flaw

Let us consider in detail all the options of visiting the creaking and establish the cause of creaking floors in apartment.

irregularities base

uneven ground under the laminate

The main reason, why creaks laminate, the base is indented, is laid on the floor or placed.

The main reasons are the creaking of recesses or pits, over which laid laminate sags. And if you come to this place, This material provisaet, which causes an annoying squeaking.

Can eliminate the occurrence of creaking, only careful Substrate alignment.

there are cases, when the laminate is creaking after laying.
The floor has a stacked laminate squeaky seats removed by partial disassembly of the laminate above the recess. Alignment recess done by checking the flatness and the solution portion.

Mandatory checking evenness of sex is a great rule and address the root causes of the squeak.

Differences and recesses subfloor are a major cause floor squeaking

After complete drying of the laminate surface can be laid on the floor.

If the entire floor creaks, You have to shoot all the laminate.

Attention! Before dismantling the floor of laminate required to number all die. This greatly simplifies the subsequent assembly process.

Freed from the base laminate floor is leveled by cordials. After complete drying, the surface is primed, It is laid on the substrate. The thickness of the substrate can not be more 3 mm.

The thickness of the substrate is chosen properly
a pad under the laminate This typical mistake for inexperienced parquet floor. To equalize the surface roughness is often used a thick substrate. And it becomes a cause, Why creaking floor. The reason is simple, at a high substrate thickness, in Metakhim recesses laminate sags, and that causes a squeak. The recommended thickness of the substrate material to 3 mm. More details on the substrate and a method of laying.

by the way, selecting a substrate, give preference to substrates, providing sound insulation, smoothing irregularities, moisture protection.

Invalid gap between the walls and the laminate

clearance under the laminate To eliminate creaking between the floor of the laminate surface and put out by the walls of the gap is maintained, which value must not be less than 7 mm.

Clearance is adjusted put out by the surface area. The larger the area, the larger the gap is required to withstand when laying.
To eliminate the squeak of the laminate, when laying necessarily expose the clearance around the perimeter. The presence of the gap allows the laminate to hold a comfortable position, prevents stresses in the tool joint.

Since the laminate expands with increasing temperature, then with a small gap boards abuts the wall. A walking coating rubs, causing creaking.

How to get rid of the creaking of the laminate, If clearance is not maintained?

It is necessary to remove the plinth. If positioned at the walls of the laminate abuts or is not pulled out of the substrate, it is necessary to remove the stops and set the gap. To correct the gap formed will need to remove the board and cut it out to places which bear against the wall. If this is due to technical reasons it is impossible to do, you can do so, Dreamer cut can either laminate or punch deepen wall.

Revised, vacuum cleaner and set the plinth.

humidity changes

cause, causing creaking laminate, It may increase the humidity in the room.
Attention! When returning to the original state of humidity, usually, floor ceases to creak.
When laying laminate, try to measure the humidity in the room and keep it consistent throughout the year,.
But how to fix the creaking of the laminate, if the humidity in the room is constantly changing?
In this case, you only need to withstand time, accustomed to laminate with differences, I remember them. Over time, squeaks and crackles leave.

Sand and dirt

remove sand and dust
Must be cleaned

floor laying must be carried out on a clean surface. pad, laminate boards, Based on a thorough vacuuming and wiped. They should not be traces of dirt and dust.

Attention! Without vacuum cleaner laying laminate is not recommended.

All works on the laminate treatment is recommended in another room.

Contact with dust castles eventually will necessarily lead to the emergence of a squeak and the destruction of the castle.
by the way, poorly made screed surface may eventually crumble, causing creaking. Under load, the laminate comes to the basics, frays components screed.

Attention! The topsheet screed recommended necessarily primed in multiple layers.

Such technological method reliably protect the substrate from destruction.

If the laminate is creaking after laying, and the reason in the sand and dust, the disassembly can not do without.

Each die is numbered, floors understand, dust is removed by vacuuming.

The surface is thoroughly grounded in several layers. Subsequent primer layer is applied only after the complete drying of the previous layer.

On the base fits a new substrate of desired thickness, from above, according to the numbering, stacked laminate.

Poor quality board
low-quality laminate

One of the reasons, causing the appearance of laminate flooring squeaking, can be low quality material. Even high-quality base, purity during assembly, correct clearance, correctly chosen substrate give rise to squeak, If you stacked laminate of low quality. In low-grade laminate is a weak point locks, not sustained by size. That's what causes the emergence of a squeak.

Scrape eliminated only complete cover change. Tips for repairing laminate.

Tension in the castles
voltage castles

This is the most common cause of. Moreover, such a defect can be observed in high-quality laminate, but only in the first few weeks or months. A professional laminate has one quality, he knows how to adapt to the geometry of the room, taking the optimal position.

It is only necessary to provide a laminate gaps, so he could take a comfortable position. Squeaks disappear by themselves after a few weeks.

Tips for fixing the floor creak

And how to eliminate squeaking laminate without disassembling?

Here are some tips, the implementation of which saves the day, eliminates squeaking parquet or laminate floor boards.

  1. Eliminating local squeak. To eliminate creaking bed, it is necessary to heat the wax candle. It is necessary to pour hot wax and wipe the seams of the laminate planks creak in places. Grout is best done with a thin plastic spatula. Good results are obtained with the help of an old floating plastic card, already withdrawn from circulation.
  2. If you do that creaks laminate indiscriminately? Floor creaks at the walls, the, removing the baseboards, zapenivayte joints with foam or fill them with white glue.
  3. In the middle of the room problem is solved by drilling the holes diameter 0.6 mm and a PVA adhesive injection using a syringe and does not occur within 48 hours.
  4. If you walk the thresholds that can be stuck on the transparent silicone.
  5. pour oil, as a means to eliminate the squeak.
  6. Using foam depressions floor.

Conclusion:

  1. Reason creaking floors made of laminate affects the complexity of the fix the problem.
  2. To creak was not shown, it is necessary to make an even surface, select the desired substrate thickness, work in a clean room with clean materials, use a high-quality laminate.
  3. To eliminate creaking laminate forever, It recommended the ideal floor screed.
  4. Watch out for wet areas.

But the decision is yours and site to make repairs will help you.

Video: Eliminating parquet squeaks (Parquet meter)

Video: Squeaky floor how to remove

Video: Elimination of creaking floor with his hands

The method how to replace a single board laminate

Video: Replacement of the damaged laminate boards

Share with your friends to vote record

Rate post:
1 Звезда2 Звезды3 Звезды4 Звезды5 Звезд (1 assessments, the average: 1.00 of 5)
Loading...
Do you want to place the information in this or any other article - contact, discuss.

Share your experience in the repair

Your email address will not be published. Required fields are marked *

3 + twenty =