the main / All Plumbing / faucets / Self Repair diverter

Self Repair diverter

The functioning bathroom, there are cases, requiring minor repairs diverter, which is able to handle any, Having a standard set of tools. The most common problem here is leakage. To resolve it you need to, to know its structure and types. The process switch in the mixer is different from the type: they are spool, cork, Cartridge and push-button.

The apparatus consists of the following elements:

  • housing;
  • Bokovina;
  • Supply pipes;
  • outburst;
  • union nut;
  • Sleeve;
  • Cone.

How to disassemble diverter
shower switch device

Diagnosing problems in the switch

If you want to repair the shower switch, it can be understood without difficulty. In most cases it will be necessary to leak, but it does not mean, that the cause is always the same. The reasons may be as follows:

  • Leaking single-lever mixer;
  • jamming buttons;
  • Simultaneous supply of water to the shower and the main valve;
  • Weak aqueous feed pressure;
  • Water to flow inside the control mechanism.

When, when the master mixer device familiar, the true cause of failure there quickly.

It is worth noting, when repair switch soul is made to work very carefully, instruments are used only to tighten the nuts, else better to do manually, so as not to drag the details and does not spoil everything.

Replacement of the cartridge switch soul

If there is a standard single-lever faucet in the bathroom, the, probably, the cause of the fault is an internal cartridge. He mixes different streams of water in the process. Repairing it is not subject, It will need a new. When purchasing be sure to know the diameter and length of the rod.

Cartridge shower switch
So look cartridge diverter.

Repair step:

  • Removing the Bezel Blank;
  • Using a standard screwdriver or hexagon unscrewed fixing screw;
  • removed the lever;
  • unscrewed nut, fixing the cartridge into the mixer;
  • Pulled out the old and the new set;
  • With attention going back mechanism.


Replacement of sealing rings diverter

Currently, the most popular is the push-button switch. But, it has one small flaw: periodic leakage of water due to the rapidly coming into disrepair rubber O-rings. There are two options for repair pushbutton switch mixer: installation of a new kit or cleaning and softening old.

To change the ring is necessary:

  • dismantle button;
  • Using a wrench, unwind the entire device;
  • pull rod, remove the old and install the new o-rings;
  • Carefully assemble the mixer back.

If the rings are not much worn out or a new set of long wait, you can soften them with a standard solvent or gasoline. But, you need to know, not all materials can be exposed to them, so 100% the result can not wait.

Sealing ring switch soul
Since the sealing ring switch looks soul

How to replace the diverter

There is another reason, on which pushbutton switch may malfunction during operation: spring failure. Repair it is not subject to, only replacement. must:

  • dismantle, spout and shower hose;
  • Remove the adapter itself;
  • Remove cap and a fixing screw;
  • With the old control rod spring;
  • Remove the old, to establish a new working spring;
  • Carefully collect back. = C3goP7vh3fU

Other problems with diverter

Few pleases weak water pressure. The main reason for this - a dirty aerator. This device, set in place the spout. Fault easily removed with a thorough cleaning.

there are cases, that the poor water pressure is due to its simultaneous filing in shower, and gander. Most often, this problem occurs in the spool types. The reason - the unsuitability for use of gaskets and O-rings. For troubleshooting action scheme is:

  • dismantle the handle. In some types of mixers are simply removed, other need to unscrew the locking screw;
  • Change the old gasket on the new. At the same time check the status of the sealing rings, if necessary, also change the;
  • assemble mixer.

Recommendations for repair shower mixer switch

Any switch with the soul at the tap must be of high quality and certified. Do not skimp on things. Then the repair will not have to do often. It is also recommended to carefully handle the plumbing and to make preventive measures.

Upon detection of worn sealing rings and optionally the spring to run the store. Rings can be done independently of the rubber tube.

Regardless, any failure occurred, still have to disassemble. If you are unsure, that the back will be able to collect it properly, look for instructions, it necessarily applied to the entire plumbing.


Share with your friends to vote record

Rate post:
1 Звезда2 Звезды3 Звезды4 Звезды5 Звезд (1 assessments, the average: 5.00 of 5)
Do you want to place the information in this or any other article - contact, discuss.

Share your experience in the repair

Your email address will not be published. Required fields are marked *

4 × 3 =