the main / All the repair / Furniture / How to make a table tennis table with his hands: dimensions, blueprints

How to make a table tennis table with his hands: dimensions, blueprints

Very many people like to play table tennis, but not everyone does it. First of all, dealing in expensive equipment. After table tennis from world producers are very expensive, and not every common man can afford such a pleasure. But if you really really want to drive the ball racket, why not think about, how to make a table tennis table with his hands? Especially, that it is not such a terrible.

simple tips, without which it is impossible to do

Do not just grab for tools. You should start with very simple things. First of all, look around and choose a location, where future design will be placed. Choose should be based on the type of table tennis, which may be either stationary, a light-collecting.

Stationary table does not understand, for it is necessary to build a separate room. Only then he will not deteriorate from bad weather and sun, and the game for such a table will be fun. But not every cottager can afford to pay extra meters at the playing place, so often, choose easy-teams tennis tables.

Comfortable table tennis with his own hands made to stand on a hard surface, have a perfectly smooth surface and round it is necessary to provide space. who was playing table tennis knows, players periodically run back from the table for a short distance.

Council: perfect Lot, highlighted by a game of table tennis - is the area of ​​5x8 m. and, should not blind the sun, should not be wind gusts, It should not be biting insects (well it, probably, the country is not really).

preparing drawings, instruments, material

Unlike some other items, which can increase or decrease the size of, table tennis table must always comply with standards, Otherwise the game will be very inconvenient:

  1. The height from the floor to the grid - 760 mm.
  2. The length of the table - 2740 mm.
  3. The width of the table - 1525 mm.

Here is the drawing of a standard table tennis.

Of course, All settings made tennis table with his hands drawings should reflect a clear and understandable. Besides the standard size of the table, indicate also the options installed in the grid future, as in this picture.

Determine the size, to look at the material and tools, which will be necessary for successful work. We will proceed from the fact, which above designated size of table tennis with their hands to make. In this way, we need:

  1. Plywood, desirable polished (2 list, 1525× 1525 mm, thickness 12 mm).
  2. edged lumber (5 pcs, 50× 50 × 3000 mm).
  3. Bracket fastening metal legs - 4 PC.
  4. Screws (5×89 – 38 pcs; 3,5×49 – 45 pcs).
  5. 4 Bolt for connecting the brackets with legs.
  6. Antiseptic for the treatment of wooden surfaces.
  7. Putty for wood and spray paint green and white colors.
  8. hacksaw.
  9. Drill.
  10. Welding machine.
  11. Tools for applying the primer and paint.

list made, tools and material prepared, Now you can start immediately to, how to make a table tennis with his hands.

Step guide on self-creation of the table for a game of table tennis

Preparing blanks

Since our table tennis should be easily assembled and disassembled, then this should be created, namely - it is necessary to cut metal workpiece mounts, which can be easily disassemble and reassemble.

To prepare the plywood is not difficult for the surface, as in the sale of plates in line with our size.

Council: as the plywood is sold at the right size width, it need only adjust the length. To do this, measure out from each sheet 15, 5 cm and saw off the excess. This way you will achieve, that plywood joints are situated just below the grid.

Now we have to cut timber, and then to treat it with an antiseptic. Such treatment will increase the life of the product and a table tennis table with their own hands created will last for a long time. While lumber drying, cook mounting brackets and make them self-tapping screws for holes.

Stages of the table assembly

  1. Razmechaem burr and sobiraem, using self-tapping screws, a support structure for the table. To strengthen the frame is screwed to the corners of the metal brackets, which hold the corners in one state task.
  2. Try leg to fastening and, if necessary,, remove extra layer of wood. It is extremely important to ensure the accuracy of matching feet and Tripod Mount. So as not to confuse them further, better to enumerate the details.
  3. Now fasten installed in the socket timber to the bracket. For greater strength using bolts and do everything very carefully and accurately. Screwing the four timber, we get the frame, which will require further work.
  4. We are doing on the table layout, try on and, using self-tapping screws, fasten it to the final frame. To do this, drill holes, putting a cover to the frame and gently curl. Of course, screws can be screwed from the back side, it is only necessary to calculate the length of their right. otherwise, folding table tennis table with their hands do not get, and spoil, since the ends of the screws will stick to the surface and interfere with the game.
  5. The last phase of our work in the process of, how to make a table tennis table with his hands, this painting. To start, countertop surface should be prepared for painting, for which it is necessary to blow the strong air stream. It is easy to do this with the help of a compressor. In its absence,, countertop should be thoroughly and wipe with a cloth obmesti, sufficiently rigid structure. After all the action, applied to the surface layer of putty and forward, while it is good to dry.

Worktops table tennis table for the street with their hands painted made in two layers: We cover the first layer - waiting for the complete drying. We cover the second layer and also forward, when the well is dry. Now, using an aerosol can, Apply layout, Sets the grid and to play table tennis table is made with their own hands, you can start using.

Council: making table tennis independently calculate the length of the bars, that will underlay so, that they were shorter than the length of the playing surface, Besides, their cross section shall prevent the deformation of the tabletop.

Using information, you will quickly make a table tennis table for the street with their hands, than unspeakably rejoice their loved ones and significantly save the family budget. Well, if you still have questions about how, how to make a table tennis table with his hands video will give additional explanations.


Share with your friends to vote record

Rate post:
1 Звезда2 Звезды3 Звезды4 Звезды5 Звезд (2 assessments, the average: 5.00 of 5)
Loading...
Do you want to place the information in this or any other article - contact, discuss.

4 Comments to the post "How to make a table tennis table with his hands: dimensions, blueprints

  1. Excellent layout with a detailed explanation of the manufacture of the table! I was looking for, for the manufacture of the material with their own hands.

  2. Thank you for good information how to collect table,
    Just in time for the holidays will gather.

  3. The easiest – two plywood halves of the right size to connect the piano hinges (to clearly and docked, and bend in half for dismantling could) and put this “countertop” on the cot (or the foundation of the old clamshell) . Well, then adjust the height as it should.

  4. I also thought of doing such a table for yourself. Considered as material for the table will rise and the net and I was able to unprofitable. I decided to look ready tables. I walked around the various sites. Prices are very different, but the material is different from all the tables. The site fit-trade one table I looked carefully. I liked the material, and design. I decided to order it. by the way, if you are interested, then ordered the table on this in general brought him to me to the entrance and at what besplatno.Teper not worried about a homemade table. Although, everyone decides for himself!

Share your experience in the repair

Your email address will not be published. Required fields are marked *

5 × 5 =