First you need to decide, where there will be a future cabinet and what he will have the dimensions. Take a tape measure or a ruler and make all the measurements - width, depth, height. It is also necessary to make a drawing of, how it will look inside and outside the cabinet.
Drawings can be made in special programs or on paper. To save money and space as side or rear wall panels can be used. But this option is suitable, Only if the walls are smooth. It will also be useful to go to the furniture store to "feel" closets. Pay attention to the details of construction, accessories, assembly, etc.. We have already told how to make built-in closet with his hands no video, but with drawings and instructions, you can find.
When all the dimensions are known, you can start manufacturing parts. The material is best to use imported particleboard, it stronger.
- All parts must be sawn strictly by size. With the help of hacksaws do problematic. therefore, in order to save money, sawing chipboard sheets is best done in a specialty store when buying.
- The edges of the pieces you need to treat yourself milaminovoy edge. It is possible to make iron, warmed on average power. The edge is applied to the workpiece edge, on top of the iron and spend all. After a minute film can be cooled down office knife trim.
All parts are attached to each other and to the wall with metal corners and screws. Pre-need to calculate how many parts need and where will they be located, that wardrobe turned out strong and stable. Guides for the doors and fasten with screws. First the upper rail, and then parallel to the bottom.
the main thing, door to collect exactly the scheme. Guides are set strictly by the level of, otherwise the door will move down one side. If between the door and the wall formed by the slit, the door can be adjusted with a special key. The aperture adjustment is the bottom side.
- If the wall of the rear wall, you must first attach the shelves and drawers. Then sidebars, and after - the door.
- If the closet is completely assembled from the sawed elements, the first frame is about to - rear and side walls.
Better to assemble on the floor so, to the closet was face down. In this case, you must pay special attention to the rear wall. It must be carefully calibrated level and screwed exactly, t. to. it will be the main frame member. After assembling the carcass structure is lifted and mounted shelves and drawers.
Wardrobe with his hands video lessons
By Nicholas Nalimova presented a video guide how to properly fill and what to consider in making a wardrobe with his hands.
Another video guide, recommend appropriate materials and give handy tips
Economy version of the wardrobe
