How to avoid mistakes when installing the water supply with their own hands. If during the repair of the bathroom, it was decided to change their own water pipes, you must pay attention to a series of nuances, arising from their replacement. Incorrect actions can lead to errors, and they in turn have implications, which would entail financial costs. Following the proper technology to replace the pipes will help to avoid errors and problems in the water supply system.
Preparation of pipes replaced
Repair and replacement of water pipes are usually made, if there was an emergency situation: clogged pipes, rotten or burst, or in the event of a significant redevelopment toilet facilities. Before thorough remodel a bathroom or toilet, you must carefully consider the location of the plumbing, as well as places proleganiya pipes.
When planning a water supply scheme by following the moment, that access to pipelines must be free. That is, it is not necessary in the walling of the pipe wall. The best option would be to make the opening door, which will be hidden behind the main connecting pipes and hydrometers.
Counters should bytdostupny. In no case should not build in water meters into the wall. This is a violation of.
Set the bathroom is better to hide the special decorative panel, which can easily be removed and access to communications. Or equip the hatches.
It is not necessary in order to save their own finances to mount water, if there is no such skills. If, however, you wish to mount the water with his own hands. we recommend that you read how to make the wiring in an apartment.
Possible errors and their solutions when installing pipes
As known, In most older type of flats installed metal or metal pipes. In most cases, they are replaced with plastic or polypropylene tubes, which benefit by weight and ease of installation.
Masters are advised to follow some tips for self-assembly of water supply:
- Always purchase longer pipe, what you need. During installation, may be difficult, which would require additional lengths of material;
- connections, coupling, Fittings is better to take the same firm, and that acquired pipe. This is due to the fact, manufacturers guarantee that a firm connection between the parts of the manufacturer;
- When installing sewer pipes Pick up new tube diameter, corresponding to the diameter of the pipe sewage draining;
- We should not narrow pipes in different parts of the aqueduct, in the future this may lead to clogging;
- Pay attention to the slope of the sewer pipe - it must meet the standards;
- It should be noted, that the sewer replacement, old cast iron pipes firmly take a strong liking to the grounds at the junction locations. This should be taken into account when cleaning pipes from old materials, and remove the resulting rust;
- Tee, located on the sewer pipe can be damaged at the time of caulking. Carefully take care that, that did not happen. Such damage would entail replacing sewer riser;
- Installing a new sewer pipe can only be fully cleaned from dirt and old material main pipe. Installation is made with a special rubber sleeve;
- It is advisable to use an additional sound insulation, Mounted on tubes, for the reason that, that plastic pipe is much better to transmit noise.
The main features of the replacement pipe
There are some important points when replacing the water pipes. These nuances must be considered, To avoid errors when replacing the independent water supply:
- To determine in advance with shell height. Manufacturers made shells, convenient for a person of average height. Therefore, once you need to select the desired height, to know what length of the floor must be water pipes;
- If we planned capital replacement of water supply, should think about installing additional devices, such as filters for water treatment or water pressure sensors;
- Plastic pipes have another property of expanding, rather than metal, therefore necessary to directly measure the desired lengths of pipe to be installed.
It is not necessary to re-use a flexible liner pipe. Described in more detail here, what kind is best to choose a flexible liner.
errors, arising from self soldering pipes
The process of soldering plastic pipes is not difficult task. This requires a special device, which has in its construction a heating element. On both sides of this element is provided with special openings: in one of them the pipe segment is inserted into the prepared, and the fitting is inserted into the other outside. Both parts are heated under the influence of temperature to a point, then, molten elements are interconnected. In this way, sealed joint is obtained solid pipe.
A few tips, which will help to avoid mistakes in soldering water supply:
- soldering machine must be clean, and holes for heating materials must not contain residues, which were sealed on it before. It is also necessary to observe the purity of the premises, in which the procedure;
- Before the arrangement of the material on the machine, pipe better wipe degreaser;
- Compound pipes after heating should occur in seconds, otherwise the material will start to harden, which will lead to poor articulation;
- It is not necessary to press strongly on the pipe when connecting, this can cause a oplyvov, that will hinder the movement of water through the pipes;
- Too little effort is also undesirable, in this case pipes are connected unevenly, and in the future it may be broken due to the strong pressure;
- It is important to find out the best time of heating pipes, it depends on their diameter.
To avoid errors when installing the water supply, do not neglect these tips, because then you have to re-alter the whole water supply system.
