Washing machines - is household appliances, which is used every day, but experiencing heavy loads. It is important not only to choose a washing machine when buying, but also to know, how to care for this device. Most models have similar problems, so, knowing the kinds of breakdowns washing machines, you can eliminate them, some effort yourself.
This device, whatever brand it may be, eventually wear out, like any other mechanism. The device can start with the time wrong or noisy work. Before you do anything with it, you need to understand, why rattles washing machine. Noise can be factory, as not all models work reasonably quiet, and may be a consequence of failure, which eventually will bring the device out of action.
Common causes loud noises at work
The noise of the washing machine can be caused by the following reasons:
- bolts, serving for fixing the drum, forgot to remove during transport.
- Bearings are out of order.
- Between the wall and the drum stuck foreign object.
- The drum has a drive system with a pulley, which could weaken.
- Balances are not secured or is done poorly.
- hatch seal has worn.
- Improper installation of the device.
In order to correctly identify, causing a washing machine noise, must pay attention, when the noise stops and starts. It can occur when the, with push-ups or other functions.
If the washing machine is very noisy, not always at home for sure can not determine the cause of the malfunction of household appliances. This requires to take into account the model, age, appliance brand, and also have some skills or experience, to choose the right course of action. If the cause of the fault can not be established, better to seek professional help.
Main causes and remedies
When washing small items can fall behind the tank wall and get stuck between it and the drum. It can be as small items of clothing, eg, socks, and small stones, from the pockets of debris, come off the buttons and buttons, coins. In this case, rattles washing machine during the spin cycle. When a washing process, foreign objects vibrate a little, and not rustle, but when the drum starts to spin, extraneous sounds are produced at high speeds.
To remove debris, You need to remove the heater and manually remove all, that has accumulated between the drum and the wall.
Often after transporting purchase new owners forget to remove the transit bolts from tank. Bolts need to, so that the drum is not damaged during transportation depreciation spring. If they are not free, then when the device will be heard loud knocking and appears unusual vibrations. In order to solve the problem, you just need to unscrew the fasteners.
If faulty bearings, the washing machine is very noisy constantly. Many models have several of these bearings. In order to test the knot, the device must be disconnected from the power supply and try to turn the drum by hand. If he makes sounds and turns with effort, it is time to change the bearings.
Weakening of the drum drive pulley verified as follows: the unit runs in test mode. In this mode, part rotates slowly in one direction, then the other. need to heed, It does not sound at this point, the characteristic crack. If it is, the drive is weakened. To correct this problem, remove the rear wall of the machine and tighten the pulley nut.
Thunders the drum of the washing machine and in the case, If it is loose counterweights. These devices are located in a circle of the machine tank and used for the repayment of vibrations from the occurrence of the centrifugal force in the drum. Most often suffer from the problem of poor quality or old device, where connection had come loose from the constant shaking. Fix the problem can be, tightening the nuts of fastenings.
The reason why is buzzing washing machine
Noise may appear in the event, If the unit is wrong. The floor must be sufficiently flat and firm, should not sag. When the drum there is a centrifugal force, because of which there is:
- A loud knock.
- unusual vibrations.
- The device starts to wobble.
Corrected a problem simply: you want to install a washing machine on a level on the hard floor.
If the washing machine has become much noise, and visually okay, It will not be superfluous to check, the condition of the rubber seal for sealing the hatch. It happens, that rubber rassyhaetsya or seal all right, but it is not the right size. The drum may be at work to cling to seal, with the result that will be heard creaking.
Most often when push-ups outside noise becomes audible best in the washing machine, because the drum spins up to high revs. If the laundry at this point to stop and look inside the machine, it will be possible to find a rubber chips. Enough to replace the seal, or set it so, so it does not interfere with rotation of the drum. Excess sealant may be carefully cut or grind off knife sandpaper. After that, the chips have to be removed.
If the washing machine is buzzing at the sink, the possible reason for failure may be a malfunction of the drain pump. It may or may fall out, and clogged garbage.
Buzzing washing machine at push-ups is not always due to some failure. Many models have a rather noisy spin function, and it must be described in the data sheet of the household appliance. Most often, manufacturers specify the item in decibels. However, if you hear a metallic clanking or knocking, then you need to try to find the cause of the fault. Possible causes damage to the washing machine may be as follows:
- Could wear or drum bearing member has a large backlash. To check, you need to disconnect the device from the network and try to move up and down the drum. If it is possible to move over, than 1 cm, the gap is too big. You can hear it only when the push-ups, because at this point the drum experiences the maximum load.
- Noise can appear due to wear of the drain pump sleeves or contact with foreign objects (stone, coins, trash).
The reason for the noise of the washing machine may be elementary hitting the small metal objects reel; to get rid of this problem, they just need to remove.
It is important to set the level of the machine and fix the adjusting screws. Reduce vibration during operation of the washing machine can be substituted under feet rubber or buying in a store special supports, dampers, silicone under the legs.
Many people faced with such a problem, that the washing machine does not drain and buzzing. This is a common fault, and it can be caused by:
- clogging or breakage of the drain pump;
- clogging of the drain hose or nozzle;
- the excesses of the drain hose;
- clogging water inlet filter.
If the water is not discharged in the first place to check the vane pump.
It often gets stuck debris and metal objects, eg, small money. Extraneous noises in the washing machine may be heard at the beginning of its work, and after attempts drain.
Here's how: There is a small door, behind which is the drain filter and pump vanes. The door opens arms, and the filter gently unscrewed. From there, pour the water so immediately enclose rags. After the tube has been unscrewed, you need to clean it and check carefully the place for foreign material and get them. Release from the pump vane debris. Screw the filter and check the operation of the device.
If the device still does not work, the main causes of damage to the washing machine may be lurking in pump failure or clogging of the drain hose. If no water is coming after, the filter was removed, it means, that debris stuck in the pipe or tube bent.
If long blades wedged pump fails. The benefit it can be to buy it costs on average 1500 rub. Substitution pump pump not constitute special skills.
Some of the brand at the damage shown on the display warning. So, eg, if noisy washing machine Samsung,on the display you can see the code E2. It means, The noise is caused by some kind of malfunction.
You run the program and the washing machine is not filled with water, the probable causes are as follows:
- valve has been closed;
- bend pipe;
- clogged mesh filter which is installed in connection hoses.
If these reasons are eliminated then deal with the valve or the chip is no longer do without a master.
Depending on the cost and the operating time is not always advisable to carry out such repairs.
The basic problems of noise
Causes damage to the washing machine may be in the factory marriage, and the natural wear of equipment. faults often associated with improper use of the device or inattentive relation thereto. Many problems can be eliminated, if the time to check clothing pockets before washing, shake it: it helps to avoid clogging the filters and nozzles. 
The noise of the washing machine when the drum rotates, it is often called small objects, freely rotating with clothes, or rapid wear of bearings. In order to extend the life of machinery, you must not overload the washing machine drum during loading, It is also not recommended to use it half empty.
Too frequent breakdowns washing mashinmogut flow from systematic violations of operation of this device. If you learn how to use technology, Many problems can be avoided.
Videos about the causes and methods of eliminating noise
