Question check wiring often arises in the case of acquisition of property. How to do without an electrician and do everything yourself? It's not a secret to anybody, that a man under the power of all, It was the desire and time for training.
An explicit example of this - The site itself Electricians, which briefly and clearly tells, how to do the wiring in the house, apartment or in the country with their own hands. In addition, the project provided useful advice on the organization of lighting, as well as the installation cost of electric heating. As a result - many visitors have learned to independently maintain and repair electrical wiring: the replacement of sockets to create a ground loop in the area. Another useful site direction - household appliances. After all, we are often faced with such problems at home, as the poor performance of the TV, teapot or washing machine. If you do not warm microwave, bad freezes refrigerator or do not understand the reasons for not warm iron, you may
e pose a problem in the comments, followed by experienced experts will give you useful advice.
Want to learn more and will not be spent for the services of an electrician? Then stay tuned Site samelectrik.ru and actively participate in the comments. After a while, and you will be under the power of any work, related to electricity!
Before start repairing the apartment with his hands, should think about the state of the wiring. If you are inclined to believe, that her replacement is necessary, start with the question of the election shall be held. Usually, Wire used in older homes aluminum, with all its pros possessing brittle and prone to microcracks. For apartments and houses should give preference to copper wires.
Immediately replace the electrical wiring in the house cost to start with the definition of the estimated load. Summarize the capacity of all electric appliances and do not forget about those, you just want to buy. Knowing the number of consumption, easier to choose the section of the wire. section of the wire 1 mm will come to power 2kW, if it is copper and 1kW, if aluminum. The expected power is best calculated for each room, for some of them to build a better power lines separately, given their maximum load.
For the construction of the wall cables have "Stroebe" puncher or do a manual circular saw cuts.
but before, you start such a responsible "measures" do not forget fundamental rules:
- Replace the wiring if the repair needs to be done completely and accurately.
- Decide on the number and location of all devices, sockets and switches, to make up a competent project rated power consumption.
- Select the material for the work, save, there should not be. If this cable - the VVGng3 * 2.5 * 1.5 or VVGng3, if the wires- the copper, if the sockets and switches - is a ceramic or other heat-resistant base and nickel-plated or chrome-plated contacts. On every single line should be your machine in the switchbox.
- Wiring must be performed correctly, and terminal boxes must be in easily accessible locations. Always necessary to provide back-up boxes, machines, sockets.
- Working with electricity requires compliance with safety and qualification. therefore, If you do not own nor those, no other, entrust their security specialist.
changes the residential wiring necessarily imply the preparation and approval of the project, and implementation by qualified personnel only, by authorized.