the main / All the repair / Walls / Beautiful apron in the kitchen with his hands

Beautiful apron in the kitchen with his hands

Apron called a vertical part of the wall, linking together the wall cabinets and countertop.
Apron must be made of a material, which is easy to clean, is not exposed to chemicals, resistant to temperature extremes.
Most often, the apron is laid with ceramic tiles. Wide variety of colors, drawings, ornaments, sizes allows you to create ceramic tile aprons, not only to protect the surface of the wall, but also to improve the design space. to learn, how to upload an apron in the kitchen tiles, enough to read our article.

Where better to start?

The work begins with calculating the appropriate amount of material, method determination tiling, preparing a companion material and tools.
apron in the kitchen Let's start with the way the tiling.
The most commonly used standard method of laying, wherein the tile is placed in horizontal rows. He also called the base. Another way to have a diagonal tile laying.
At a cost of diagonal method is more expensive.
Do not forget, when working with ceramic tiles marriage is inevitable because of its fragility.

Calculate the total area of ​​the apron, divide by the area of ​​one tile and, adding to the resulting even number 10%, get the right amount of tile.
It remains to clarify, how to put an apron in the kitchen with his hands and get to work.

Basic rules laying apron in the kitchen tiles

Before proceeding to the installation of the apron, check out tips:

  1. It is recommended to make the height of the apron more, than the distance from the table to the bottom edge of the wall cabinets.
  2. The lower part of the apron should be placed on 2 cm. lower edge countertops.
  3. The apron is made either on a total area of ​​vertical walls or selectively: above the cooking stove and sink.
  4. Usually the distance from the tabletop to the upper boxes is from 55 cm. to 60 cm.

The procedure for laying tiles on the apron

Apron with your own hands can put anyone, who knows how to handle a trowel.
toolA few words about tools.
You will need a trowel, three types of spatulas: toothed, plain and rubber for grouting. To control the flatness of the best rail and building level. Cut tile preferable Tile.
Do not forget the pencil and ruler, without marking not perform.
All these accessories will help you put an apron in the kitchen with his hands.

For, to learn, how to put an apron of tile in the kitchen, you must perform a preparatory stage right.
Mark the area for laying tile, begin to surface preparation:

  • Be sure to remove the old paint;
  • removed to masonry old tiles and plaster;
  • rail surface planarity is verified;
  • cement mortar or plaster mixes align surface;
  • Stan primed.

removing the old tiles To remove the old tiles on the floor, spread a protective film, cover the furniture and kitchen utensils.
Tiles removed using the punch, or by hand, using a chisel and hammer.
If the plaster is crumbling all that it is necessary to clean up the brickwork.
After cleaning the surface of the wall is treated with primer.
How to put an apron of tile in the kitchen, if a minimum of knowledge?

In order to properly spread the apron in the kitchen, Begin by marking.
You will need a cord, whereby a lower horizontal level bounces.
By marking applied metal profile for gypsum board and is attached to the dowel-wall nails. Setting profile ensures you from the collapse of laying ceramic tiles and allow exactly lay the first row.
In the center of fighting off a vertical line with a plumb and a cord.

Tile is placed on the adhesive or by means of tile grout. Find out how much tile adhesive will need help calculator.

To put an apron of tile in the kitchen, we must prepare the pre-adhesive. Clay diluted according to the instructions using a drill.
It is better, if you use a special attachment for drills.
Put the apron
And here are the tips on, how to lay tile on an apron.
Spread apron in the kitchen start from lower, from the middle to the edges of the surface.
Before laying on the tiled floor by dividing crosses. This will allow you to see the final picture.

Stack kitchen apron of tile is best through the ranks. The next number is placed after the installation of all of the previous row.
Allowed to lay tile on an apron not only solid, but the square-cluster method.

On the tiles evenly applied adhesive, smeared on the tile with a notched trowel, and tiles laid on the apron. It is best to use a spatula with teeth to height 6 mm.
Tiles should be attached to the wall, lightly press, if necessary, to knock a rubber mallet.
Each row check on horizontal and vertical using a spirit level, and the resulting rack plane.
It remains to clarify, how to lay tile in the kitchen apron.
Laying tile on an apron, pay attention to the flatness of the resulting surface. If the tiles are drowned or corner stand, tiles removed, Glue is added or removed once. Tile again applied to the surface.
Do not hurry. Each subsequent tiles laid similarly.
Put the apron 001
In places the tiles joints install tic.
When you laid on the apron all the whole tiles, you can start gluing pieces.
Carefully measure each piece, dimensions to bring the workpiece and Tile Slice.
Try, as accurately as possible to cut blank.
If necessary, holes in the ceramic tile sverlivayutsya diamond drills.
Control tile laying on the apron make the next day. Learn about methods of tile work, you can look video.

If a tile found void, tile is pulled, cleaned of glue and glued again.

At the last moment removed the crosses, and remove the metal profile. You set it at the bottom of the apron design.
In the next stage after drying the apron of tile proceed with surface cleaning. Wash the sponge is best diluted in warm water and detergent.
grouting
Further it is necessary to take a wooden or plastic wand and carefully clean the joints, then wipe the surface with a cloth.

Laying tiles on the apron ends grout shvov.Uznat how the grout for a tile need help calculator. Grout is rubbed into the joints using a rubber spatula. Half an hour later the remains of grout removed, tile surface is carefully wiped with a sponge or cloth. With the help of the electric wires are aligned seams.
Now you fully understand, how to put an apron in the kitchen with his hands.
But a few tips can not hurt. way of, As otteret zatverdevshyy glue or grout from the tile.

Tips for beginners:

  • spread apron in the kitchen with his hands can not only from the traditional plitochki;
  • produced special kits with decorative tile modules;
  • do not overdo it with decor;
  • it is recommended to combine matte countertops with similar surfaces of the apron;
  • to visually expand the room is advisable to use light-colored tile.

It all depends on your preferences and tastes. Next video of laying ceramic tile on an apron will help to understand the intricacies of work.

Video:

Video:

Share with your friends to vote record

Rate post:
1 Звезда2 Звезды3 Звезды4 Звезды5 Звезд (While no ratings)
Loading...
Do you want to place the information in this or any other article - contact, discuss.

Share your experience in the repair

Your email address will not be published. Required fields are marked *

15 + nineteen =